AIR POWERED STIRRER PLR10 15000RPM 0.3NM

Excl. VAT: £795.00 Incl. Tax: £954.00
OR

Quick Overview

Product Code:
  • SR940-20
Overhead compressed air stirrer, Buddeberg PLR10, stirrer only, for up to 25 litres of low viscosity liquid, maximum speed 15000rpm, with 13mm diameter clamping tube for mounting on a stand and 9mm o.d. nozzle for connection to an air supply, requires a compressed air source for operation.

AIR POWERED STIRRER PLR10 15000RPM 0.3NM

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

More Information.

Download Product Information

Details

High torque, air-powered, continuous running overhead stirrer which is ideal for a variety of laboratory stirring tasks. Certified in accordance with the European ATEX Directive 94/9/EG (see notes below).

  • Spark-free operation
  • Excellent power:weight ratio
  • Can be run whilst overloaded to a standstill without damage
  • Can operate from 0 to 6 bar pressure compressed air supplies
  • Air consumption 260 litres/minute at 6 bar pressure
  • Stainless steel housing resists corrosion
  • Maximum stirrer volume 25 litres
  • Continuously adjustable speed control using valve supplied
  • Clockwise rotation

Stainless steel housing. With valve for continuously adjustable speed control, integral exhaust air venting and 13mm diameter clamping tube for mounting on a stand incorporating a 9mm o.d. riffled nozzle for connection to compressed air supply tubing. Requires a (preferably dry) compressed air source for operation.

 Model      PLR10
 Speed (no load)        rpm     15,000
 Torque        Nm 0.3
 Gears   0      
 Sample viscosity capability          Low                                    
 Drive shaft, L x diameter mm 24 x 10
 Overall height mm  124
 Overall diameter mm  38
 Weight kg  0.9

 

 

 

 

 

 

 

 

                                                       Information for operating stirrers in potentially explosive atmospheres                     
  •   Only couplings (SR943-06 to PR943-21) rather than chucks, must be used to attach paddle shafts.
  •   The stirrer is provided wih earthing points for equipotential bonding and must be suitably connected.
  •  Before using the pump, the operator must be satisfied that it is suitable for working within the prevailing environmental conditions.