BURNER FUEGO SCS INFRA-RED SENSOR IGNITION 230V 50/60HZ AC

Excl. VAT: £711.00 Incl. Tax: £853.20
OR

Quick Overview

Product Code:
  • BY340-40
Burner, Fuego SCS, with push button ignition, infra red sensor and LCD readout, 103 x 130 x 49mm length x width x height, weight 0.7kg, without gas supply, for 230V 50/60Hz a.c.

BURNER FUEGO SCS INFRA-RED SENSOR  IGNITION 230V 50/60HZ AC

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

More Information.

Download Product Information

Details

For occasional or intermittent use, or serial flame sterilisation.

General specifications:

  •  Automatic gas ignition
  • Low-profile, easily cleaned, stainless steel casing
  • Gas and air regulators for fine control
  • Visual alarm of burner head clogging and “burner hot” residual heat indicator
  • Smooth sculpted design channels spillages away
  • Can be tilted to avoid nozzle contamination
  • Overheat protection system cuts off gas supply if overheating occurs or the electrical supply is interrupted

Model SCS has push-button ignition with the flame maintained as long as the button is pressed and extinguishes on release. Alternatively, a built-in infra-red sensor with range 5 to 50mm can be used and requires two hand movements to activate the flame, maintaining it for a timed period adjustable within two ranges: start-stop from one second to two hours or Auto-off from one second to two hours. An LCD readout with heat resistant glass face indicates time remaining and burner functions/ adjustment. allows hands-free operation if required. Supplied with foot pedal, tilt mechanism, nozzles for natural gas or LPG, rack for up to 3 wire loop holders, tubing connector, wrench for gas connection and screwdriver for burner head. Overall 103 x 130 x 49mm L x W x H. Weight 0.7kg. Requires a 230V 50/60Hz single phase supply for the ignition circuit. Without gas supply.

Note: Gas cartridges can be exported only as seafreight – deck cargo. Local purchase is recommended.