DEIONISER COPE-ELGA VISION 125 WITH CARTRIDGE AND SPOUT

Excl. VAT: £245.00 Incl. Tax: £294.00
OR

Quick Overview

Product Code:
  • DB030-10
Deioniser, Cope-Elga, Vision 125, maximum flow rate 60 litres per hour, typical hard water ouput 80-120 litres, with colour change cartridge and dispensing spout.

DEIONISER COPE-ELGA VISION 125 WITH CARTRIDGE AND SPOUT

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

More Information.

Download Product Information

Details

  • High quality water instantly available
  • Simple to install – wall mounting
  • Colour change resin
  • Supplied with dispensing spout
  • Hand held dispensing gun accessory on flexible lead

The Cope-Elga Vision Deioniser provides quality water as and when it is required. The need for elaborate and costly storage is eliminated. Just turn on the mains water tap and take off the water instantly either through the top dispensing spout or the accessory hand held dispensing gun. The resin changes colour when the cartridge is exhausted.

Model    Vision 125
Max. flow rate
l/h 60
Max. input pressure           mm  90 (6 bar)
Mains water connection     
  0.5" BSP hosetail  
Typical water quality 
µS/cm 0.1 to 10
Typical output, water areas  
 
Hard (400-500ppm) litres 80 to 100
Mid (100-300ppm) litres 150 to 400
Soft (40-80ppm) litres        500 to 900
Overall dimensions H x W x D      mm 385 x 92 x 100
Weight kg 2.5

 

 

 

 

 

 

 

 

 

With colour change cartridge and dispensing spout.

Ultra-pure water, as produced by the Cope-Elga Vision, is almost entirely free of dissolved mineral salts, including silica, and will have a neutral pH since the dissolved CO2 will have been removed. From an inorganic standpoint, ultra- pure water will conform to International Pharmacopoeia and laboratory grade specifications for purified water. For less critical applications the Cope-Elga Vision is capable of producing pure water at the end of each cartridge run, extending its life by approximately 25%. Pure water is similar to ultra-pure water although CO2 and silica will be present.

  Ultra-Pure Water        Pure Water
Conductivity
1 to 0.1 µS/cm 10 to 1 µS/cm
Resistivity       1 to 10Ω -cm  0.1 to 1Ω -cm       
Silica
<0.05 ppm (mg/l)  not removed 
Carbon dioxide 
<0.5 ppm (mg/l) not removed
Trace dissolved metals   <0.001 ppm (mg/l) <0.005 ppm (mg/l)      
Residual Solids <0.5 ppm (mg/l) <5 ppm (mg/l)
Average pH Neutral 4 to 7