DEIONISER ELGASTAT B118 WITH SPARE C118 CYLINDER AND METER

Product Code: DB200-10

£2,957.28

inc. VAT

£2,464.40

ex. VAT

Download Product Information

The ultra-pure water, as produced by this Elga deioniser is almost entirely free of dissolved mineral salts, including silica, and will have a neutral pH since the dissolved CO2 will have been removed. From an inorganic standpoint, Ultra-pure water will conform to International Pharmacopoeia and laboratory grade specifications for purified water.

The B118 is a high output, floor standing pressurised deioniser which can be incorporated into a piped distribution system or used for direct connection to equipment requiring a pressurised treated water supply. It features an analogue scale conductivity  meter which can be powered by either 9V battery or from a 220-240V 50Hz mains supply if available. This monitors treated water quality and indicates when the resins are exhausted. A replacement cylinder can be fitted in minutes.

Model    B118
Output min./max
litres* 200/50000
Water purity µS/cm  1 to 0.1
Flow rate   
litres/hour    240 
Mounting
  Floor
Cartridge  
Regenerated
Meter   Yes
Voltage V 9 or 220-240
Max. input pressure bar        4.6                            
Overall H x W x D     mm 880 x 220 x 210
Weight kg 18

 

 

 

 

 

 

 

 

 

*The output capacity will vary depending on the local water conditions.

With spare C118 cylinder and conductivity meter requiring 9V battery (not supplied) or 220-240V 50Hz supplies.