Portable moisture titrator for the rapid and accurate determination of the low concentrations of water in a wide range of materials. Features include easy operation, “ACE” automatic error compensation, up to 10 user-programmable methods stored in the memory, rechargeable battery for field operation, built-in thermal printer and multi-lingual display/print out. Results are available in ppm, mg/kg, % and µg water. Suitable for moisture analysis within standards ASTM D1533, D4928, D6304, IP386, APIMPMS chapter 10.9 and BS60814.
- Calculation modes: w/w, weight/dilution (all user programmable), ratio, volume/density, v/v, with sample i.d. and time/date stamp
Measuring ranges | ||
possible | 1µg to 200mg water | |
typical | 1µg to 10mg water | |
moisture | 1ppm to 100% | |
Maximum sensitivity | 0.1µg | |
Sample analysis rate | 2.24mg/minute | |
Maximum current | 400m | |
Start or end delay | 0 to 30 minutes (selectable) | |
Drift correction | Automatic | |
Precision | ±3µg (10 to 100µg) | |
±3µg (100µg to 1mg) | ||
±0.3% (>1mg) | ||
Statistics (up to 99 runs) | Maximum, mean, minimum values | |
Outputs | USB and serial ports | |
Power supply | 90-264V 47/63Hz a.c. or 12V d.c. | |
Dimensions H x W x D | mm | 290 x 255 x 130 |
Weight | kg | 3 |
Complete with titration vessel, generator electrode with frit, drying tube, molecular sieve, stirrer bar, injection septa, 1ml syringe with needle, built-in printer, rechargeable battery, 12V d.c. vehicle adapter, and instructions.