MECHANICAL DRUM PUMP, 1000MM TUBE SET 230V 50/60HZ

Excl. VAT: £493.00 Incl. Tax: £591.60
OR

Quick Overview

Product Code:
  • PX138-40
Mechanical drum pump, Buerkle AccuOne, with 1000mm tube set, rechargeable battery, discharge tube and charger requiring a 230V 50/60Hz a.c. supply. 5900-1100

MECHANICAL DRUM PUMP, 1000MM TUBE SET 230V 50/60HZ

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

More Information.

Download Product Information

Details

Bürkle AccuOne, motorised, mechanical drum pumps are flexible, convenient, liquid transfer pumps, comprising separate rechargeable battery, control and pump housing and tube set modules. For general laboratory and light industrial use.

  • Continuously adjustable pumping speed from 0.4 to 12 litres/minute
  • Suitable for most liquids up to 500mPas viscosity
  • All modules easily disconnected for cleaning or exchange
  • Up to 600 litres can be pumped from one battery charge
  • Latest generation, lithium ion technology with no memory effect and auto shut-off operating before full discharge
  • Excellent chemical resistance, materials in contact with media: Hastealloy C, polypropylene and PTFE
  • Choice of pump tube sets up to 1000mm long

Supplied with rechargeable battery, rigid ¾" diameter tube set as indicated, and charger requiring a 230V 50/60Hz single phase supply.

                                                                                                                Static Electricity Hazards
 Attention is drawn to the need to use correct procedures to prevent any potential ignition hazards due to the accumulation of static electricity charges during pumping.   Correct procedures are described in BS5958 ‘Control of Undesirable Static Electricity’: Part 1 ‘General Considerations’ and Part 2 “Recommendations for Particular Industrial Situations’. In general there is a need to earth-clamp all metal parts of the pumping system, e.g. drum, pump tube and receiving vessel, using an earth conductor having a resistance to earth of not more than 10 Ohm. The use of plastic drums or vessels may increase the potential risks and their use in hazardous areas or with hazardous liquids should be carefully considered in the light of the recommendations of BS5958.