DEIONISER COPE-ELGA VISION 250 WITH CARTRIDGE AND SPOUT

DEIONISER COPE-ELGA VISION 250 WITH CARTRIDGE AND SPOUT

Product Code: DB030-20

£430.80

inc. VAT

£359.00

ex. VAT

Download Product Information

  • High quality water instantly available
  • Simple to install – wall mounting
  • Colour change resin
  • Supplied with dispensing spout
  • Hand held dispensing gun accessory on flexible lead

The Cope-Elga Vision Deioniser provides quality water as and when it is required. The need for elaborate and costly storage is eliminated. Just turn on the mains water tap and take off the water instantly either through the top dispensing spout or the accessory hand held dispensing gun. The resin changes colour when the cartridge is exhausted.

With colour change cartridge and dispensing spout.

Model    Vision 250
Max. flow rate
l/h 60
Max. input pressure    psi  90 (6 bar)
Mains water connection     
    0.5" BSP hosetail               
Typical water quality
µl    0.1 to 10
Typical output, water areas      
   
Hard (400-500ppm) 
litres       170 to 200
Mid (100-300ppm)
litres 300 to 800
Soft (40-80ppm) 
litres 1100 to 1900
Overall H x W x D mm 660 x 92 x 100                                                    
Weight kg 4.2

 

 

 

 

 

 

 

 

 

 

Ultra-pure water, as produced by the Cope-Elga Vision, is almost entirely free of dissolved mineral salts, including silica, and will have a neutral pH since the dissolved CO2 will have been removed. From an inorganic standpoint, ultra- pure water will conform to International Pharmacopoeia and laboratory grade specifications for purified water. For less critical applications the Cope-Elga Vision is capable of producing pure water at the end of each cartridge run, extending its life by approximately 25%. Pure water is similar to ultra-pure water although CO2 and silica will be present.

  Ultra Pure Water Pure Water                          
Conductivity
1 to 0.1µS/cm 10 to 1µS/cm
Resistivity    1 to 10MΩ-cm 0.1 to 1MΩ-cm 
Silica 
<0.05 ppm (mg/l)                not removed 
Carbon dioxide
<0.5 ppm (mg/l) not removed
Trace dissolved metals      
<0.001 ppm (mg/l)  <0.005 ppm (mg/l) 
Residual solids <0.5 ppm (mg/l) <5 ppm (mg/l)
Average pH Neutral 4 to 7