THERMAL CYCLER 3PRIME 24 X 0.2ML BLOCK 100-230V 50/60HZ

Techne® ³Prime personal thermal cyclers from Bibby Scientific are self-contained, personal thermal cyclers with numerous applications in molecular biology and diagnostics laboratories. A choice of models is offered with fitted blocks either for 0.2ml or 0.5ml microtubes in strips or plates. A full colour touchscreen provides control and display of programme status, with templates allowing easy programming of even complex procedures. Up to 1000 x 3-segment programmes can be stored with incremental/decremental timing and temperature elements. Programme naming and password protection are also available. A heated lid is provided with temperature adjustment (100 to 115°C) and heat on/off switch. The heated lid for ³PrimeX and ³PrimeG models also adjusts to accommodate a variety of consumables. Additionally, ³PrimeG models are convenient, small-scale, gradient thermocyclers which also hold half a 96-well plate in an 8 column x 6 row configuration. Annealing temperatures can be optimised over a 1 to 14°C gradient between 30°C and 80°C. All ³Prime models include a USB output to transfer programmes and temperature logs between instruments or the user’s computer.

General specifications:

Model		3Prime
Temperature range,     block                                          gradient	ºC   ºC	4 to 100  -
Block uniformity (at 55ºC)	±ºC	<0.3
Temperature accuracy (at 55ºC)	±ºC	0.25
Minimum/maximum gradient	ºC	-
Maximum number of  programmes (3-segment)*		1000
Run end time calculation?		yes
Selectable heated lid  temperature**	ºC	100 to 115
End of programme alarm?		yes
Manual pause and stop facility?		yes
Incremental/decremental  temperature control?		yes
Programme ramp rate	ºC per  second	up to 3.0
Peltier elements per block		4
Data/network interface		USB
Overall D x W x H	mm	350 x 210 x 180
Weight	kg	6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

* The maximum number of programmes available depends on the number of segments required per programme.

** The heated lid will only come on if block temperature is set above 35°C.

For 100 to 230V 50/60Hz single phase supplies.

Important Notice    Purchase of Techne thermal cyclers conveys a limited, non-transferable immunity from    suit for the purchaser’s own internal research and development and applied fields, other than        in- vitro diagnostics, under non-real-time thermal cycler patents of Applied Biosytems LLC.