- High quality water instantly available
- Water output quality is to BS EN ISO3696 grade 3 and ASTM D1193-06 type IV level
- Simple to install – wall mounting
- Colour change resin
- Choice of model with dispensing spout or coiled hose with trigger-operated dispenser gun
Labwater deionisers provide quality water as and when it is required. The need for elaborate and costly storage is eliminated. Just turn on the mains water tap and take off the water instantly either through the top dispensing spout or hand held dispensing gun. The resin changes colour when the cartridge is exhausted.
| Model | Labwater 2 | |
| Max. flow rate | l/h | 60 |
| Max. input pressure | bar | 5 |
| Mains water connection | 0.5" BSP hosetail | |
| Typical water quality | µS/cm | 1 to 10 |
| Typical output, water areas | ||
| Hard (400-500ppm) | litres | 212 |
| Mid (100-300ppm) | litres | 320 |
| Soft (40-80ppm) | litres | 1280 |
| Overall dimensions H x W x D | mm | 760 x 80 x 100 |
| Weight | kg | 3.5 |
With 2 x colour change cartridges and dispensing spout.
| Pure Water | |
| Conductivity | 10 to 1 µS/cm |
| Resistivity | 0.1 to 1Ω -cm |
| Silica | not removed |
| Carbon dioxide | not removed |
| Trace dissolved metals | <0.005 ppm (mg/l) |
| Residual Solids | <5 ppm (mg/l) |
| Average pH | 4 to 7 |