The ultra-pure water, as produced by this Elga deioniser is almost entirely free of dissolved mineral salts, including silica, and will have a neutral pH since the dissolved CO2 will have been removed. From an inorganic standpoint, Ultra-pure water will conform to International Pharmacopoeia and laboratory grade specifications for purified water.
The B118 is a high output, floor standing pressurised deioniser which can be incorporated into a piped distribution system or used for direct connection to equipment requiring a pressurised treated water supply. It features an analogue scale conductivity meter which can be powered by either 9V battery or from a 220-240V 50Hz mains supply if available. This monitors treated water quality and indicates when the resins are exhausted. A replacement cylinder can be fitted in minutes.
|Water purity||µS/cm||1 to 0.1|
|Voltage||V||9 or 220-240|
|Max. input pressure||bar||4.6|
|Overall H x W x D||mm||880 x 220 x 210|
*The output capacity will vary depending on the local water conditions.
With spare C118 cylinder and conductivity meter requiring 9V battery (not supplied) or 220-240V 50Hz supplies.