Easy-to-use power supply for routine electrophoresis applications.
- Fully programmable, up to 9 programmes each with 9 parameter sets can be stored in non-volatile memory
- Integral timer with alarm at end of run
- Automatic run continuation when power restored
- Twin line, alphanumeric LCD readout, 2 x 16 characters
- Datalogging facility holds up to 3600 values (voltage, current and power, time or volthours) including programme number and step
- RS232 control port allows remote control via users’
Safety features
- Automatic disconnection of a.c. power from the high voltage transformer if a ground leakage of greater than 500µA is detected
- Fully protected against any overload condition including accidental short circuit of the output
- High voltage increases smoothly when one of the pre-set limits is reached, no sudden voltage surge occurs at the outputs
- Galvanic RS232 input/output insulation prevents ground loop interferences when connected to a computer
| Model | EV2650 | |
| V | 600 | |
| mA | 500 | |
| W | 150 | |
| Timer | 0 to 99 hours 59 minutes, 0 to 99.9 KVh | |
| Programmes | 9 sets of 9 programmes | |
| Outputs | 4 in parallel, 4mm sockets | |
| No load detection | On/off, programmable | |
| Overall W x D x H | mm | 310 x 260 x 150 |
| Weight | kg | 10 |
Constant voltage, current and power. For 210-250V 50/60Hz single phase supplies. Supplied with manual and mains lead.