Grant LT ecocool benchtop refrigeration units have built-in thermostatic controllers, tanks and pumps for external coolant circulation.
- Choice of model ranges:-
– -20 to +100°C, -25 to +150°C, -30 to +200°C
– Tank volumes 5 or 6 litres - Active cooling throughout the whole temperature range
- High power (up to 500W) cooling available if required
- Controller includes digital display of set/actual temperature, 3 temperature pre-sets, 1
minute to 99 hour 59 minute timer and high (and low – CL120-70/-85 only) temperature alarm settings - “Eco” mode operation provides up to 80% energy saving compared to standard chillers
with compressor on/off modes - High pressure pumping up to 2 bar
- Adjustable overtemperature cut-out
- Models LT ecocool 150 and 200 additionally have USB interfaces for remote control via
the user’s computer using accessory Labwise software and DIN sockets for connection to external temperature probes
General specifications:
Model | LT ecocool 150 | |
Temperature range* | °C | -25 to +150 |
Cooling power* at 20°C | W | 350 |
Stability at 20°C | ±°C | 0.02 |
Liquid flow rate | litres per minute | 14 to 22 (adjustable) |
Pump head pressure at 1 litre/minute | mbar | 530 |
Calibration points | 5 | |
Customisable programmes (segments) | 1 (30) | |
Temperature pre-sets | 3 | |
Alarms | High and low | |
Interface port | USB | |
Ext. temperature probe socket | 6-pin mini DIN | |
Display | Colour QVGA TFT | |
Overall D x W x H | mm | 430 x 245 x 640 |
Weight | kg | 28 |
Inlet and outlet connections | Super seal, 9.5mm diameter ferrule, M16 or BSP | |
Reservoir capacity | litres | 6 |
* Typical, at ambient of 20°C and using water.
Supplied with built-in controller, stainless steel connectors and adapters for super seal, tubing ferrule, M16 or BSP connections. For 230V 50Hz single phase supplies..